Hello friends I am back this week just as tickled as I can be with the results of my Embroidery Hoop Quilt. I am sharing some photos and information so you can begin to assemble your own embroidery hoop quilt this week. The full tutorial will be available for download in my newsletter at the end of this month. There was just too much information, so I am going with the thought process that a "Picture speaks a thousands words!"
![]()
If you look closely at this photo you can see the tenderness of the fabric and the very old stitches from my Grandmother! (thrilling isn't it!) This is History my friends, just as real as if you and I were reading a History book, maybe even more, because my Grandmother's hands worked these stitches.
![]()
Since I knew that I was going to be hand embroidery around some of the pieces for this quilt I went with a fusible product to attach the fabric together. However if you would rather use a sewing machine this will work very well too and might even be quicker.
![]()
2. Set aside pieces of cut embroidery.
3. Cut (16) 12 x12 inch squares for “quilt blocks.” Suggested materials are cotton, muslin, canvas, new linen.
4. Preheat iron to cotton setting and iron all fabric that has been cut. If you are having difficulty with wrinkles you can use the steam setting.
![]()
2. Remove fusible product from package. Measure the correct size and either cut or tear the fusible product to fit. Place the piece of fusing under the embroidery that you are attaching to the “quilt” block.
3. Place a damp cloth over the embroidery, making certain the embroidery is directly over fusible material. Place the iron flat on the damp cloth that is on top of the embroidery and hold for around 20 seconds.
4. When you lift the iron, the embroidery is now attached. If it does not feel secure you can re-iron the area for a few more seconds. Make certain the top cloth is still damp.
![]()
The Beauty Of Preserving History
Last week I shared with ya'll my struggle with fabric. This week we will be focusing on assembling.If you look closely at this photo you can see the tenderness of the fabric and the very old stitches from my Grandmother! (thrilling isn't it!) This is History my friends, just as real as if you and I were reading a History book, maybe even more, because my Grandmother's hands worked these stitches.
Since I knew that I was going to be hand embroidery around some of the pieces for this quilt I went with a fusible product to attach the fabric together. However if you would rather use a sewing machine this will work very well too and might even be quicker.
Using Pinking Shears
1. Using pinking shears cut vintage embroidery from pillow case, dishtowels, tablecloth. (whatever it is that the embroidery has been stitched on.) Cut the pieces that you want to use and cut approximately 1 inch away from embroidery being careful not to cut any of the stitching.2. Set aside pieces of cut embroidery.
3. Cut (16) 12 x12 inch squares for “quilt blocks.” Suggested materials are cotton, muslin, canvas, new linen.
4. Preheat iron to cotton setting and iron all fabric that has been cut. If you are having difficulty with wrinkles you can use the steam setting.
How to use A Fusible Product.
1. Heat iron setting to cotton/wool and do not use any steam.2. Remove fusible product from package. Measure the correct size and either cut or tear the fusible product to fit. Place the piece of fusing under the embroidery that you are attaching to the “quilt” block.
3. Place a damp cloth over the embroidery, making certain the embroidery is directly over fusible material. Place the iron flat on the damp cloth that is on top of the embroidery and hold for around 20 seconds.
4. When you lift the iron, the embroidery is now attached. If it does not feel secure you can re-iron the area for a few more seconds. Make certain the top cloth is still damp.
